|
EPR/PVC
Single Conductor
Non-Shielded MV-90 5kV
 |
|
| A
P P L I C A T I O N S |
1.
2.
3.
4. |
Raceways
Aerial (when properly supported)
Industrial plants
Primary power and distribution circuits |
|
5.
6.
7.
8. |
Utility substations
Generating plants
Wet or dry locations
Conduit, ducts, open tray or open air |
|
| S
P E C I F I C A T I O N S |
1.
2.
3.
4. |
Conductor:
Stranded soft-drawn bare copper
Conductor Shield: Semi-conducting compound or tape
Insulation: Ethylene propylene rubber (EPR)
Jacket: Polyvinyl chloride (PVC) |
|
5.
6.
7. |
Temperature:
90°C continuous,
130°C emergency, 250°C short circuit
Voltage: 5000 Volts 100% insulation level
Industry Approvals:
UL 1072 listed MV-90 wet or dry
ICEA S-68-516, NEC Article 326, NEMA WC8 |
|
|
|
* Amps per conductor is in accordance
with NEC table 310-73, for three conductors in an isolated conduit
in air, based on a conductor temperature of 90°C and ambient temperature
of 40°C. For other installation conditions, refer to the National
Electrical Code.
NOTE: May also be available with a Hypalon Jacket. |
|
|
JCH Wire & Cable... striving to exceed
customer expectations for quality, service, and value
